# Statistics

Related Online Training modules | |
---|---|

Question Types and Statistics | |

Crosstabs | |

Grids | |

Generally it is best to access online training from within Q by selecting Help > Online Training |

Q has an expert system which automatically selects the most appropriate statistics to show on a table. Most commonly, these are percentages and averages.

Alternative statistics can be shown within each cell, to the right of the table or below the table. These statistics can be selected by right-clicking on the table and selecting from within **Statistics – Cells** and, on some tables, also from **Statistics – Right** and **Statistics – Below**.

Which statistics are available depends upon the type of questions selected. Hold down the Ctrl key while clicking to prevent the menu from closing, in order to toggle more than one statistic.

Statistics can be renamed either for the entire project or for specific tables within a project (see Output Text).

## Contents

- 1 %
- 2 % Column Responses
- 3 % Column Share
- 4 % Excluding NaN
- 5 % Responses
- 6 % Row Responses
- 7 % Row Share
- 8 % Share
- 9 % Total Responses
- 10 % Total Share
- 11 5th Percentile
- 12 25th Percentile
- 13 75th Percentile
- 14 95th Percentile
- 15 Average
- 16 Base n
- 17 Base Population
- 18 Coefficient
- 19 Column %
- 20 Column Comparisons
- 21 Column n
- 22 Column Names
- 23 Column Population
- 24 Columns Compared
- 25 Column Standard Error
- 26 Column Standard Error of Mean
- 27 Corrected p
- 28 Correlation
- 29 Cumulative %
- 30 d.f.
- 31 Effective n
- 32 Effective Base n
- 33 Expected Average
- 34 Expected %
- 35 Expected Correlation
- 36 Expected n
- 37 Index
- 38 Interquartile Range
- 39 Labels
- 40 Lower Confidence Interval
- 41 Lower Confidence Interval %
- 42 Maximum
- 43 Median
- 44 Minimum
- 45 Missing n
- 46 Mode
- 47 Multiple Comparison Adjustment
- 48 n
- 49 n Observations
- 50 Not duplicate
- 51 Observation
- 52 p
- 53 Population
- 54 Probability %
- 55 Range
- 56 Residual
- 57 Residual %
- 58 Row %
- 59 Row Population
- 60 Row n
- 61 Standard Deviation
- 62 Standard Error
- 63 Sum
- 64 Text
- 65 Text With No Blanks
- 66 Total %
- 67 Trimmed Average
- 68 t-Statistic
- 69 Unique Text
- 70 Upper Confidence Interval
- 71 Upper Confidence Interval %
- 72 Values
- 73 z-Statistic

## %

The weighted proportion of respondents to give a particular response. This is computed as **Population/Base Population**.

Note that in some other programs a different computation is used, whereby the percentage is only computed for respondents that have provided data; thus in Q it is possible to have a NET which is less than 100% (which indicates some people have not selected anything) while in the other programs the NET, which is often labeled as Total, always shows 100%).

## % Column Responses

The proportion of the total number of responses (weighted) in the column represented by the cell. Refer to % Responses for more information. Where the data contains missing values and/or hidden categories the percentages may not add up to 100%, and the value of the statistic will not correspond to the value obtained by summing the values of n in each column.

The proportion of the total **Sum **for the column of the table represented by the cell. Where the data contains missing values and/or hidden categories the percentages may not add up to 100%.

## % Excluding NaN

Same as **%** except that categories with a `NaN` Value have been excluded from the denominator when computing the percentage.

## % Responses

The proportion of the total number of responses (weighted) represented by the cell. Only applies to Pick Any and Pick Any - Compact questions. This is computed as the percentage shown in the cell divided by the sum of the percentages in the table. Note that where a category in a table has been created by merging other categories, these are de-duplicated prior to performing the calculation. Where the data contains missing values and/or hidden categories the percentages may not add up to 100%, and the value of the statistic will not correspond to the value obtained by summing the values of n in the table.

## % Row Responses

The proportion of the total number of responses (weighted) in the row represented by the cell. Refer to % Responses for more information. Where the data contains missing values and/or hidden categories the percentages may not add up to 100%, and the value of the statistic will not correspond to the value obtained by summing the values of n in each row.

The proportion of the total **Sum **for the row of the table represented by the cell. Where the data contains missing values and/or hidden categories the percentages may not add up to 100%.

The proportion of the total **Sum** for the table represented by the **Sum** cell in a margin of the table (obtained via **Statistics – Right** or **Statistics – Below**). If you delete some categories in a table, but leave these categories in the NET, the share shown in the NET may exceed 100%. Where the data contains missing values and/or hidden categories the percentages may not add up to 100%.

## % Total Responses

The proportion of the total number of responses (weighted) represented by the cell. Refer to % Responses for more information. Where the data contains missing values and/or hidden categories the percentages may not add up to 100%, and the value of the statistic will not correspond to the value obtained by summing the values of n in the table.

The proportion of the total **Sum** for the table represented by the cell. Where the data contains missing values and/or hidden categories the percentages may not add up to 100%.

## 5th Percentile

The value which 5% of non-missing observations are equal to or below. This is referred to as in Hyndman and Fan (1996). In the edge-case where exactly 5% of values are less than a specific value (), the 5th percentile is computed as , where is the next highest value; this method is sometimes known as the *HAVERAGE* method and is referred to as in Hyndman and Fan (1996).

## 25th Percentile

The value which 25% of non-missing observations are equal to or below. This is referred to as in Hyndman and Fan (1996). In the edge-case where exactly 25% of values are less than a specific value (), the 25th percentile is computed as where is the next highest value; this is sometimes known as the *HAVERAGE* method and is referred to as in Hyndman and Fan (1996).

## 75th Percentile

The value which 75% of non-missing observations are equal to or below. This is referred to as in Hyndman and Fan (1996). In the edge-case where exactly 75% of values are less than a specific value (), the 75th percentile is computed as , where is the next highest value; this method is sometimes known as the *HAVERAGE* method and is referred to as in Hyndman and Fan (1996).

## 95th Percentile

The value which 95% of non-missing observations are equal to or below. This is referred to as in Hyndman and Fan (1996). In the edge-case where exactly 95% of values are less than a specific value (), the 5th percentile is computed as , where is the next highest value; this method is sometimes known as the *HAVERAGE* method and is referred to as in Hyndman and Fan (1996).

## Average

The weighted mean, which is defined as **Sum / Population**.

## Base n

The total unweighted sample size that is used to construct the cell in the table. Keep in mind, Base n is not affected by weights, except if the weight for some respondents is zero -- essentially removing them from the analysis.

## Base Population

The estimated number of people in the total population from which the data is derived. It is the weighted total sample size (i.e., **Base n**). Unless different sample sizes apply to different cells in the table, such as with a split cell experimental design (randomized experiment), the **Base Population** will be the same for all cells in the table. Where a **Date** question is used, **Base Population** only relates to the individual time period.

## Coefficient

The coefficient in an **Experiment** or **Ranking** question.

## Column %

The weighted proportion of respondents in a column to give a particular response. Note that in some other programs, a different computation is used, whereby the percentage is only computed for respondents that have provided data; thus in Q it is possible to have a NET which is less than 100% (which indicates some people have not selected anything) while in the other programs the NET, which is often labeled as Total, always shows 100%).

## Column Comparisons

Statistical tests comparing columns (within rows).

When used in **Statistics - Below** this will return the results of the tests conducted on the **Statistics - Below > Average** statistic.

### See also

- Interpreting Column Comparisons
- Column Comparisons with Missing Data and Grid Questions
- How to Specify Columns to be Compared
- Statistical Assumptions for selecting which statistical tests are used to set column comparisons.

## Column n

The number of observations containing data in the column. For example, if the column represents males, then the Column n is the number of males in the sample that do not have missing data on the row variables. Keep in mind, Column n is not affected by weights, except if the weight for a particular sub-group is zero -- essentially removing them from the analysis. Also note, this definition means that if you change a Pick Any question to a Number - Multi question, this will cause the Column n to change (and become equivalent to the Base n).

## Column Names

The names of columns used in **Column Comparisons**. See Statistical Assumptions for more information.

## Column Population

The weighted sample size of the column.

## Columns Compared

The names of the columns that were compared against in **Column Comparisons**.

## Column Standard Error

The standard error of the **Column %** (expressed as a proportion).

## Column Standard Error of Mean

The standard error of a mean.

## Corrected p

A corrected p-value taking into account if the Cell comparisons setting of Multiple comparison correction is set to False Discovery Rate. If not, **Corrected p** = **p**.

## Correlation

A value of 0 indicates no statistical association. A positive number indicates a positive association – as one goes up the other, on average, also goes up, and vice versa for negative values. The further a correlation from 0, the stronger the relationship. Correlations range from -1 to 1. The correlation is available when a Number or Number - Multi question is selected in each of the blue and brown drop-down menus. The specific type of correlation is specified in the **Correlations** setting in Statistical Assumptions.

## Cumulative %

The cumulative percentage, starting with the top of the table.

## d.f.

Degrees of freedom. Only computed when using parametric statistical tests that compute a t-statistic.

## Effective n

Equivalent to **n**, except adjusted to reflect the *effective sample size*. See Effective sample size.

## Effective Base n

Equivalent to **Base n**, except adjusted to reflect the *effective sample size*. See Effective sample size.

## Expected Average

The expected value of the statistic under the assumption of independence. The statistic that Expected refers to is sometimes a percentage, sometimes an expected average and sometimes an expected value of Population. This depends on the table. See Effective sample size.

## Expected %

The expected value of the statistic under the assumption of independence. The statistic that Expected refers to is sometimes a percentage, sometimes an expected average and sometimes an expected value of Population. This depends on the table. See also Summaries of Grid Questions (Number - Grid and Pick Any - Grid).

## Expected Correlation

The expected value of the statistic under the assumption of independence. The statistic that Expected refers to is sometimes a percentage, sometimes an expected average and sometimes an expected value of Population. This depends on the table.

## Expected n

The expected value of the statistic under the assumption of independence. The statistic that Expected refers to is sometimes a percentage, sometimes an expected average and sometimes an expected value of Population. This depends on the table.

## Index

The ratio of the row percentage (or column percentage) to the total for the column (or row) multiplied by 100. For example, if Pepsi has an Index of 150 for Males, this would mean that males are 50% more likely to purchase Pepsi than the average for the population.

## Interquartile Range

The difference between the 75th and 25th percentiles.

## Labels

The labels assigned to specific values of categorical variables. For example, “Gender” may be associated with the value “1”. Only available when RAW DATA is selected in the brown drop-down.

## Lower Confidence Interval

The lower-bound of the Confidence Interval.

## Lower Confidence Interval %

The lower-bound of the Confidence Interval.

## Maximum

The highest value of a respondent.

## Median

The value which 50% of non-missing observations are equal to or below. For example, if 51% of respondents have a value of 0 and 49% have a value of 1 then the median will be reported as 0. This definition is different to that employed in some other statistics and market research programs. This is referred to as in Hyndman and Fan (1996). In the edge-case where exactly 50% of values are less than a specific value (), the 50th percentile is computed as , where is the next highest value; this method is sometimes known as the *HAVERAGE* method and is referred to as referred to as in Hyndman and Fan (1996).

## Minimum

The lowest value of a respondent.

## Missing n

The number of observations with missing data.

## Mode

The most commonly occurring non-missing value. Where there is a tie, the lowest value is selected.

## Multiple Comparison Adjustment

**Corrected p** / **p**.

## n

The number of people in the data file in the cell in the table. This is commonly referred to as a *count*. When the table involves numeric data, **n** is the sample size used to compute the average or correlation. Keep in mind, n is not affected by weights, except if the weight for a particular sub-group is zero -- essentially removing them from the analysis.

## n Observations

The number of observations in *repeated measures* data; used to compute the statistics in the cell. Used in Experiment and Ranking questions.

## Not duplicate

A 1 indicates that the cell is not “overlapping” with another cell and a 0 indicates that it overlaps. For example, if a table contains “18 to 24”, “25 to 24” and “18 to 34” then the “18 to 34” cells will have a value of 0. This is used in the computation of multiple comparison adjustments (i.e., if a cell overlaps other cells, it is not used when computing cutoff values).

## Observation

Observation was introduced in Q 4.6 |

The observation number (in terms of the rows in the data file) that gave the response in the cell.

## p

The *p*-value for the cell; it does not take into account any Multiple Comparison Corrections that have been specified. Refer to p-Values for a definition.

## Population

The estimated number of people in the population (as determined from the weight) in the cell in the table. When the table is showing categorical data (i.e., Pick One - Multi, Pick Any, Pick One and Pick Any - Grid), the Population is a weighted count (i.e., the weighted **n**). When the table involves numeric data, **Population** is the estimate of the number of people in the population to which the average or correlation applies.

## Probability %

Ranking questions display a **Probability %** which is an estimate of the proportion of the population that would choose an option first (i.e., with the highest ranking). This statistic is not computed by counting up the proportion to give an option the highest rank; rather, it is derived from **Coefficient** (via a logit transformation) and takes into account all the ranking information across the sample. In general, **Probability %** has a lower sampling error than will be computed if counting up the proportion to choose a particular option once and can thus be a more reliable statistic for assessing preferences.

See MaxDiff Case Study for an example discussing interpretation of this statistic.

See: See Allison, P. D. and N. A. Christakis (1994). "Logit Models for Sets of Ranked Items." **Sociological Methodology** 24: 199-228.

## Range

**Maximum** - **Minimum**.

## Residual

The difference between the observed and expected value.

## Residual %

The difference between the observed and expected %.

## Row %

The weighted proportion of respondents in a row to give a particular response. Note that in some other programs, a different computation is used, whereby the percentage is only computed for respondents that have provided data; thus in Q it is possible to have a NET which is less than 100% (which indicates some people have not selected anything) while in the other programs the NET, which is often labeled as Total, always shows 100%).

## Row Population

The weighted sample size of the row.

## Row n

The number of observations containing data in the row. Respondents that have either not selected any of the options in the columns of the brown drop-down question, or, have missing data in one or more of the cells of the row, are not counted. Keep in mind, Row n is not affected by weights, except if the weight for a particular sub-group is zero -- essentially removing them from the analysis.

## Standard Deviation

A measure of central tendency. The *population standard deviation* is obtained by having **Bessel's correction** off for **Means** in **Statistical Assumptions**, and the *sample standard deviation* is obtained by having it on (this is the default). See also Results Are Different to those from Another Program#Standard deviation.

Where the sample size is 1, a NaN is returned. See also Standard deviations with weighted data

## Standard Error

The estimated standard deviation of the sampling distribution of the primary statistic on the table. Where the data is numeric, this is computed for the Average, where it is an Experiment it is computed for the Coefficient, where a Ranking it is for the Probability %/100, and where it is a proportion, it is computed for whichever exists of %/100 or Total %/100, except for with Pick One - Multi questions in which case the proportion is whichever is applicable of a Row % and Column %. Note that percentages in Q are multiple by 100 (i.e., they do not appear as proportions), whereas the standard errors are of the proportions (i.e., they need to be multiplied by 100 if comparing with the percentages).

Where the data is not weighted, or, **Weights and significance** is computed using **Kish's correction** or **Set to** a specified value, the standard error of the proportion is computed as:

where if *Bessel's correction* is selected and 0 otherwise and where where no weight has been applied and is the calibrated weight if **Weights and significance** is set to **Kish correction** or **Set to** a specified value (see Weights, Effective Sample Size and Design Effects). Where the **Weights and significance** has been set to **Automatic** or **Taylor series linearization**, then *Taylor series linearization* is used to compute the standard error, and the Bessel correction is always assumed to be 1 (which will give a different result to those used in most statistical texts, which instead have no Bessel correction).

Where the data is not weighted, or, **Weights and significance** is computed using **Kish correction** or **Set to** a specified value, the standard error of the mean is computed as:

where if Bessel’s correction is selected and 0 otherwise and were no weight has been applied, is the calibrated weight if **Design effect for weight** is set to **Kish correction** or **Set** to a specified value (see Weights, Effective Sample Size and Design Effects). Where the Design effect for weight has been set to **Automatic** or **Taylor series linearization**, then *Taylor series linearization* is used to compute the standard error.

Refer to Train, Kenneth E. (2009), Discrete Choice Methods with Simulation, Second Edition: Cambridge for a details regarding computation of standard errors in experiments and to Logit Models for Sets of Ranked Items Paul D. Allison; Nicholas A. Christakis, Sociological Methodology, Vol. 24. (1994), pp. 199-228, for technical details regarding parameters of Ranking questions.

## Sum

The weighted sum of all the responses, defined as **Average **multiplied by **Population**.

## Text

The raw data from text variables (e.g., verbatim responses from open-ended questions).

## Text With No Blanks

The raw data from text variables (e.g., verbatim responses from open-ended questions), with the blank entries provided at the end (i.e., underneath the non-blank values).

## Total %

The weighted proportion of respondents to give a particular response. This is computed as **Population/Base Population**.

## Trimmed Average

The average computed after deleting the lowest 5% and highest 5% of non-missing values.

## t-Statistic

**Coefficient** divided by the **Standard Error**, except for **Ranking** questions where the t-statistic is computed using the **Probability %** and the standard error for this computation is not shown. Only computed when using parametric statistical tests that compute a t-statistic.

## Unique Text

Unique text responses (i.e., all duplicates removed).

## Upper Confidence Interval

The upper-bound of the Confidence Interval. Only computed when using parametric statistical tests that compute a t-statistic or z-statistic.

## Upper Confidence Interval %

The upper-bound of the Confidence Interval. Only computed when using parametric statistical tests that compute a t-statistic or z-statistic.

## Values

The values of the variable(s) in a question (e.g., a “1” may represent men). Only available when RAW DATA is selected in the brown drop-down.

## z-Statistic

The value from a unit normal distribution which corresponds to the two-tailed value of **p**. The further this value is from 0, the more statistically significant the difference between the observed data and the **Expected **data, where 1.96 and -1.96 each equate to **p** being 0.05. Larger numbers can be shown as infinity.